Symmetrical Horn TP Antennas have a unique beam shape and characteristics. The beam section is circular: azimuth and elevation radiation angles are identical.
Symmetrical Horn TP Antennas have no side lobes, they literally focus energy into one main signal beam. Such behavior saves the most important resource in wireless - the spectrum. Thanks to these unique radiating properties, the radio collects and propagates significantly less noise in comparison to current mainstream sector antennas. The problem of noise is directly connected to antenna side lobes - basically an unavoidable feature in most competitive products. Symmetrical Horn TP Antennas behave differently, being basically "deaf" outside their main beam.
The beam pattern does not vary with frequency and the antenna gain is balanced over a very wide frequency range. These features make Symmetrical Horns TP antennas excellent sector antennas.
Symmetrical Horn TP Gen2 Antennas cover an ultra-wideband spectrum: 5180-6400 MHz!
Mainstream sector antennas have a radiation pattern that is very wide in azimuth cut but very flat in elevation cut. If an AP is too high, the customers that are too close will suffer from low AP signal.
Symmetrical Horn TP Antennas offer breakthrough scalability of wireless systems. Unique beam performance and great co-location characteristics allow for a higher density of sectors than a traditional sector technology.
Symmetrical Horn TP Antennas come with precise radiation angles, ranging from 30 to 90 degrees: a wide range of models suitable for any situation.
Symmetrical Horn TP Antennas feature our industry-changing TwistPortTM connector, a patent-pending quick-locking waveguide port. TwistPortTM is virtually lossless: with radios built according to our Reference design, there are no coaxial RF connectors or RF cables that cause signal loss. Connecting radios is brilliantly simple - “twist and lock” - all done with one hand!
Wide range of TwistPortTM Adaptors enables connection of the most popular connectorized radios of third party vendors, such as UBNTTM, MimosaTM, MikroTikTM or Cambium NetworksTM, directly to any TwistPortTM-enabled antenna.
Symmetrical Horn TP Antennas are solid aluminium bodies that are built to last and to resist any weather conditions. We use only the best materials: die cast, stamped and extruded aluminium; high quality ABS plastic, high density polyethylene; and stainless steel hardware.
Symmetrical Horn TP Gen2 Antennas offer a wide selection of seven different radiation angles covering 30° - 90° with 10° steps. This worldwide unique feature allows network builders to follow the golden rule of wireless networking: to choose the right antenna for the particular job.
While competitors limit their offering to literally a couple of sector antennas, RF elements provides a wide selection of coverage patterns so you can achieve sector coverage exactly as you need it. This is an essential base for increasing throughput and scaling your wireless networks.
|Antenna Connection||TwistPort - Quick Locking Waveguide Port|
|Materials||UV Resistant ABS Plastic, Polycarbonate, Polypropylene, Aluminium, Stainless Steel|
|Flame Rating||UL 94 HB|
|Pole Mounting Diameter||30-80 mm (recommend as close to 80 mm as possible)|
|Temperature||-30°C to +55°C (-22°F to +131°F)|
|Wind Survival||160 km/h|
|Wind Loading||25/11 N - Front/Side at 160km/hour|
|Effective Projected Area||201/86 cm2 - Front/Side|
|Mechanical Tilt||± 25°|
|Weight||1.4 kg / 3.0 lbs – single unit|
|2.2 kg / 4.8 lbs – single unit incl. package|
|Single Unit||Retail Box: 305 × 239 × 183 mm / 12 x 9.4 x 7.2 inch|
|Frequency Range||5180 - 6400 MHz|
|Azimuth Beam Width -3 dB||H 41° / V 41°|
|Elevation Beam Width -3 dB||H 41° / V 41°|
|Azimuth Beam Width -6 dB||H 60° / V 60°|
|Elevation Beam Width -6 dB||H 60° / V 60°|
|COMPATIBLE WIRELESS PLATFORMS|
|Other||Any Twisport Adaptor|